Resin-SZUV-S9006- adkeysi sare
Hordhaca Qalabka Daabacaadda 3D
Astaamaha
SZUV-S9006
SHARAXA Alaabada
SZUV-S9006 waa ABS sida SL resin oo lehadkaanshaha saresifooyinka. Waxaa loogu talagalay daabacayaasha SLA gobolka adag. SZUV-S9006 waxaa lagu dabaqi karaa qaababka Master-ka, moodooyinka fikradda, qaybaha isu imaatinka iyo tusaalooyinka shaqada ee berrinka baabuurta, caafimaadka iyo warshadaha elektiroonigga ah ee macaamiisha. Dhismaha waara ee qaybaha leh SZUV-S9006 waa in ka badan 6.5 bilood.
CAADIGA AHMEESHA
Viscosity dhexdhexaad ah resin, si sahlan dib u habeynta, fududahay in la nadiifiyo qaybaha iyo mashiinada
-Awood la wanaajiyay, haynta cabbirada oo la hagaajiyay ee qaybaha xaalada qoyan
- waxay u baahan tahay dhamaystirka qaybta ugu yar
-Nolosha shelf dheer ee mashiinka
-Hoosefoosha hoose
CAADIGA AHFAA'IIDOOYINKA
-Waxay u baahan tahay qayb ka yar wakhtiga dhamaystirka, fududaynta daaweynta ka dib
-Ku dhis qaybo adag oo sax ah oo sarreeya oo leh xasillooni cabbir oo horumarsan
-Kontaroolada tayada sare leh ee qaybaha shubka vacuum
- Hoos u dhac yar iyo iska caabin wanaagsan oo jaalaha ah
- Midab cad oo qurux badan
-Waxyaabaha SLA machinable aad u fiican
Fiiro gaar ah: heerkulka szuv-s9006 waa inuusan noqon mid aad u sarreeya. Fadlan isticmaal meel ka hooseysa 25 ℃. Qoyaanka qoyaanka ee isticmaalka iyo kaydinta waa in uu ka hooseeyaa 38RH%.
Kiisaska Codsiga
QAAR KA MID AH MASHRUUCYDA
Waxbarashada
Hands Molds
Qaybaha Gawaarida
Naqshadaynta Baakadaha
Naqshadaynta Farshaxanka
Caafimaad
Qalabka Jirka (Dareere)
| Muuqashada | Caddaan |
| Cufnaanta | 1.11-~ 1.15g/cm3@ 25 ℃ |
| Viscosity | 230 ~ 290cps @ 26 ℃ |
| Dp | 0.13 ~ 0.145 mm |
| Ec | 9.5 ~ 10.5 mJ/cm2 |
| Dhumucda lakabka dhismaha | 0.05 ~ 0.12mm |
Guryaha Makaanikada (ka dib la daaweeyay)
| CABIRKA | Habka tijaabada | QIIMO |
| 90-daqiiqo UV daawaynta ka dib | ||
| Hardness, Shore D | ASTM D2240 | 75-85 |
| Hababka dabacsanaanta, Mpa | ASTM D790 | 2,592-2,675 |
| Xoog dabacsanaan, Mpa | ASTM D790 | 63-70 |
| Module tensile, MPa | ASTM D638 | 2,489-2,595 |
| Xoog xajin, MPa | ASTM D638 | 36-53 |
| Dheeraynta xilliga nasashada | ASTM D638 | 15-25% |
| Saamiga Poisson | ASTM D638 | 0.4-0.44 |
| Awoodda saamayntu waxay gaadhay Izod, J/m | ASTM D256 | 45-70 |
| Heerkulka leexashada kulaylka, ℃ | ASTM D 648 @66PSI | 38-50 |
| Kala guurka dhalada,Tg | DMA, E” ugu sarreysa | 40-54 |
| Isku-dhafka kharashka kuleylka | TMA(T | 90~102*E-6 |
| Cufnaanta, g/cm3 | 1.12-1.18 | |
| Dielectric Constant 60 Hz | ASTM D 150-98 | 4.2-5.0 |
| Dielectric Constant 1 kHz | ASTM D 150-98 | 3.3-4.2 |
| Dielectric Constant1 MHz | ASTM D 150-98 | 3.2-4.0 |
| Xoogaga DielectricV/mm | ASTM D 1549-97a | 12.8-16.1 |
