Resin SZUV-T1120-iska caabinta heerkulka sare
Hordhac Guud
Astaamaha:
SZUV -T1120 waa huruuda SL jaale ah kaas oo leh wax qabad kulayl aan la mid ahayn. Waxay u adkeysan kartaa heerkulka ka badan 200 ℃ waqti gaaban iyo 120 ℃ waqti dheer. Waxaa loogu talagalay in lagu xakameeyo noocyo kala duwan oo heerkul sare ah iyo codsiyada baaritaanka xun.
Tilmaamaha caadiga ah
XOOG SARE iyo iska caabin wanaagsan
SZUV-T1120 waxay u istaagi kartaa qoyaanka, biyaha iyo dareerayaasha, sida shidaalka, dareeraha gudbinta, saliidda iyo qaboojiyaha. Iyada oo iska caabbinta kulaylka aan la barbar dhigi karin, waxay ku habboon tahay qulqulka, HVAC, nalalka, qalabaynta, naqshadaynta iyo codsiyada tijaabada dabaysha.
-DHAQSOOR U DHISO OO HORUMAR DHAWEEYO
Adiga oo siinaya wax soo saar degdeg ah iyo qaybo leh dusha si fudud oo si fudud loo maarayn karo, SZUV-T1120 waxay dhamayn kartaa mashruucaaga sawir ilaa qaybaha tijaabada wakhtiga ugu yar.
Kiisaska Codsiga
-Tijaabada qaybta daboolka hoosteeda
-Qalabaynta heerkulka sare ee RTV
-Tijaabada tunnel dabaysha
-Tijaabada qalabka iftiinka
- qalabaynta autoclave isku dhafan
-Baaritaannada qaybaha HVAC
-Tijaabada qaadashada kala duwan
-Orthodontics
MAGAALADA CODSIGA
Waxbarashada
Hands Molds
Qaybaha Gawaarida
Naqshadaynta Baakadaha
Naqshadaynta Farshaxanka
Caafimaad
HANTIDA JIDHKA (SHARE)
| Muuqashada | caddaan |
| Cufnaanta | 1.13g/cm3@ 25 ℃ |
| Viscosity | 400 ~ 480 cps @ 29 ℃ |
| Dp | 0.152mm |
| Ec | 7.6mJ/cm2 |
| Dhumucda lakabka dhismaha | 0.05 ~ 0.12mm |
HANTIDA MAKAANIGA AH (DAADAY KA DIB)
| Cabbirka | Habka Imtixaanka | Qiimaha | |
| 90-daqiiqo UV daawaynta ka dib | 90-daqiiqo UV +2 saacadood@160℃ kulaylka daawaynta kadib | ||
| Hardness, Shore D | ASTM D2240 | 87 | 91 |
| Hababka dabacsanaanta, Mpa | ASTM D790 | 2678-3186 | 3502-3631 |
| Xoog dabacsanaan, Mpa | ASTM D790 | 60-80 | 90-101 |
| Module tensile, MPa | ASTM D638 | 2840-3113 | 3484-3771 |
| Xoog xajin, MPa | ASTM D638 | 58-67 | 50-62 |
| Dheeraynta xilliga nasashada | ASTM D638 | 4-8% | 4-6% |
| Awood saamayn leh, heer sare ah lzod, J/m | ASTM D256 | 18-30 | 16-23 |
| Heerkulka leexashada kulaylka, ℃ | ASTM D 648 @66PSI | 81 | 98 |
| Kala guurka dhalada, Tg, ℃ | DMA, ugu sarreysa | 100 | 111 |
| Isku-dhafka balaarinta kulaylka, E6/℃ | TMA (T | 79 | 86 |
| Dhaqdhaqaaqa kulaylka, W/m.℃ | 0.171 | ||
| Cufnaanta | 1.24 | ||
| nuugista biyaha | ASTM D 570-98 | 0.49% | 0.46% |
Guryaha makaanikada ee Walxaha la daweeyay ka dib
| CABIRKA | Habka tijaabada
|
| QIIMO |
|
|
| 90-daqiiqo UV daawaynta ka dib | 90-daqiiqo UV +2 saacadood@160℃kulaylkadaawaynta ka dib |
| Hardness, Shore D | ASTM D2240 | 87 | 91 |
| Hababka dabacsanaanta, Mpa | ASTM D790 | 2678-3186 | 3502-3631 |
| Xoog dabacsanaan, Mpa | ASTM D790 | 60-80 | 90-101 |
| Module tensile, MPa | ASTM D638 | 2840-3113 | 3484-3771 |
| Xoog xajin, MPa | ASTM D638 | 58-67 | 50-62 |
| Dheeraynta xilliga nasashada | ASTM D638 | 4-8% | 4-6% |
| Awood saamayn leh, heer sare ah lzod, J/m
| ASTM D256
| 18-30
| 16 ~ 23 |
| Heerkulka leexashada kulaylka,℃
| ASTM D 648 @66PSI
| 81 | 98
|
| Kala guurka dhalada,Tg ,℃ | DMA,E”ugu sarreysa
| 100 | 111
|
| Isku-dhafka ballaarinta kulaylka, E6/℃ | TMA(T)
| 79
| 86
|
| Dhaqdhaqaaqa kulaylka, W/m.℃ |
| 0.171 |
|
| Cufnaanta |
| 1.24 |
|
| nuugista biyaha | ASTM D 570-98 | 0.49% | 0.46% |
