products

Hot sale Sla 3d Printer Diy - Print material-exquisite white-8006 – Digital Manufacturing

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We often persist with the theory "Quality To start with, Prestige Supreme". We are fully committed to delivering our clientele with competitively priced good quality items, prompt delivery and experienced support for 3d Laser Scanner Diy, Biggest 3d Printer Companies, 3d Printing In Manufacturing Industry, With a rapid advancement and our buyers come from Europe, United States, Africa and everywhere in the world. Welcome to visit our manufacturing unit and welcome your order, for further more inquires be sure to don't hesitate to get hold of us!
Hot sale Sla 3d Printer Diy - Print material-exquisite white-8006 – Digital Manufacturing Detail:

3D Printing Materials

Exquisite white-8006

Introduction of 3D Printing Materials

Characteristics

SZUV-W8006  

PRODUCT DESCRIPTION 

SZUV-W8006 is an ABS like SL resin which has accurate and durable features. It is designed for solid state SLA platforms. SZUV-W8006 can be applied in master patterns, concept models, general parts and functional prototypes in the field of automotive, medical and consumer electronics industries.The parts duability building with SZUV-W8006 is over 6.5months.SZUV-W8006

TYPICAL FEATURES

-Liquid resin`s medium viscosity, so easy recoating, easy clean parts and machines

-Improved strength retained, improved dimensions retention of parts in humid condition

-need minimal part finishing

-Long shelf life in machine

TYPICAL BENEFITS

-Need less part finishing time,easier post-curing

-Buliding accurate and high tough parts with an improved dimensional stability

-High quality controls for vacuum casting parts

-Low shrink and good resistance to yellowing

-Magnificent white color

-Outstanding machinable SLA material

Physical Properties – Liquid Material 

Appearance White
Density 1.13g/cm3 @ 25 ℃
Viscosity 376 cps @ 27 ℃
Dp 0.148 mm
Ec 7.8 mJ/cm2
Building layer thickness 0.1mm

 Mechanical Properties of Post-Cured Material 

MEASUREMENT TEST METHOD VALUE
90-minute UV post-cure
Hardness, Shore D ASTM D 2240 87
Flexural modulus, Mpa ASTM D 790 2,592-2,675
Flexural strength, Mpa ASTM D 790 70- 75
Tensile modulus, MPa ASTM D 638 2,599-2,735
Tensile strength, MPa ASTM D 638 39-56
Elongation at break ASTM D 638 13 -20%
Poisson`s Ratio ASTM D 638 0.4-0.43
Impact strength notched Izod, J/m ASTM D 256 35 - 45
Heat deflection temperature, ℃ ASTM D 648 @66PSI 62
Glass transition,Tg,℃ DMA,E”peak 73
Coefficient of thermal expension, /℃ TMA(T<Tg) 95*E-6
Density, g/cm3 1.16
Dielectric Constant 60 Hz ASTM D 150-98 4.6
Dielectric Constant 1 kHz ASTM D 150-98 3.9
Dielectric Constant 1 MHz ASTM D 150-98 3.6
Dielectric StrengthkV/mm ASTM D 1549-97a 14.9

 Note: the temperature of szuv-w8006 should not be too high. Please use it below 25c.Recommended temperature for use and preservation is 18-25 ℃

Fire Fighting Measures

(1) extinguishant

 Dry powder fire extinguishing agent, alcohol resistant foam extinguishing agent, carbon dioxide, dry sand, spray water.

(2) Special risk

 Fires may produce irritation and harmful gas

(3) The firemen of protective measures

 Fireman should wear protective appliances (eye protection, protective clothing, mailing gas with gas mask, etc.), put out the fire in the windward.

6. Accidental Release Measures

(1) Homework personnel protective equipment

 Ensure adequate ventilation, wear suitable protective clothing, make a good job in hand and eye/face protection.

(2) Environmental protection measures

 Prevent products from entering the drain or open water

(3) Cleaning method

 For a small amount of leakage, use dry sand, soil and towels absorb the residual liquid, recycling and airtight container.

 For a large number of leakage, leakage of liquid can be in front of the embankment, the introduction of recycle to safe place.

(4) Secondary hazard prevention measures

 Quickly remove all fire spark (ban on smoking in nearby, and the ignition).

7. Handling And Storage

(1) Operation treatment technical measures

 Avoid contact with eyes, skin and clothing. Don’t inhaling mist or steam, don’t accidentally swallow, keep container tightly closed after the thorough cleaning.

(2) Partial or full ventilation   Maintain adequate ventilation

(3) Safe handling matters needing attention   No smoke, no fire

(4) Safe storage conditions

 Stored in a cool, well ventilated place, away from heat, sparks and flames. Keep container tightly closed until it is put into use.

(5) packaging container and material

 In the process of custody, please do not transfer to other containers. Don’t fall back to the original containers of products that will be used.

Cases

SOME OF MY PROJECTS

btn12
btn7
汽车配件
包装设计
艺术设计
医疗领域

Education

Rapid prototype

Auto Parts

Constructional design

Art Design

Medical


Product detail pictures:

Hot sale Sla 3d Printer Diy - Print material-exquisite white-8006  – Digital Manufacturing detail pictures


Related Product Guide:
Australian company develops world’s largest 3D printer  | Handheld 3d Scanner Review
Artec’s Studio 13 software adds live 3D-scanning feedback, more | 3d Printing Rapid Prototype

Our enterprise aims to operating faithfully, serving to all of our prospects , and working in new technology and new machine frequently for Hot sale Sla 3d Printer Diy - Print material-exquisite white-8006 – Digital Manufacturing , The product will supply to all over the world, such as: Kuwait, Oman, Ottawa, By adhering to the principle of "human oriented, winning by quality", our company sincerely welcomes merchants from at home and abroad to visit us, talk business with us and jointly create a brilliant future.
  • This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
    5 Stars By Daisy from Greek - 2015.11.06 10:04
    This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
    5 Stars By Norma from Georgia - 2016.04.18 16:45
    Write your message here and send it to us