FDM 3D Printer 3DDP-500S
Fasaha mai mahimmanci:
- Tsarin ciyarwa na ɗan gajeren lokaci zai iya magance matsalar zanen filament yadda ya kamata don haka tabbatar da kyakkyawan aikin bugu.
- Ana ɗaukar dunƙule-sanduna biyu a cikin axis Z wanda zai iya tabbatar da motsi.
- Masana'antu kewaye hukumar, aiki na 200 hours ba tare da matsa lamba
- Ƙarfin da aka shigo da shi, manyan jagororin layi na layi, Ƙaramar ƙarar motsi, don tabbatar da daidaiton bugu mafi girma
- Ci gaba da bugawa a ƙarƙashin ƙarancin kayan da ƙarewa.
- 57 jerin manyan injin motsa jiki masu ƙarfi sun inganta saurin bugawa sosai.
- Akwatin kayan aiki da aka gina a ciki, ƙarin hankali da abokantaka mai amfani
Aikace-aikace:
Samfura, ilimi da bincike na kimiyya, kerawa na al'adu, ƙirar fitila da masana'anta, ƙirƙirar al'adu da raye-raye, ƙirar fasaha
Buga samfuran nuni
| Samfura | Saukewa: 3DDP-500S | Zafin gado mai zafi | Yawanci ≦100℃ |
| Fasahar gyare-gyare | FDM | Layer kauri | 0.1 ~ 0.4 mm daidaitacce |
| Lambar nozzle | 1 | Yanayin zafi | Har zuwa 250 digiri |
| Girman Gina | 500×500×800mm | Diamita na bututun ƙarfe | 0.4mm / 0.8mm |
| Girman kayan aiki | 720×745×1255mm | Buga software | Cura, Sauƙaƙe 3D |
| Girman kunshin | 820×820×1460mm | Yare mai laushi | Sinanci ko Ingilishi |
| Gudun bugawa | ≦200mm/s | Frame | 2.0mm karfe sheet karfe sassa tare da m waldi |
| Diamita na kayan amfani | 1.75mm | Buga katin ajiya a waje | Katin SD kashe layi ko kan layi |
| VAC | 110-240v | Tsarin fayil | STL, OBJ, G- Code |
| VDC | 24v | Nauyin kayan aiki | 100Kg |
| Abubuwan amfani | PLA, taushi manne, itace, carbon fiber, karfe consumables 1.75mm, mahara launi zažužžukan | Kunshin Nauyin |
150Kg |
