Good quality Leica Rtc 360 3d Laser Scanner Price - Print material-exquisite white-8006 – Digital Manufacturing

Short Description:

Product Detail

Product Tags

Feedback (2)

Quality First,and Customer Supreme is our guideline to provide the best service to our customers.Nowadays, we are trying our best to become one of the best exporters in our field to meet customers more need for Big Size Printer For Sale, Sla 3d Printing, Big Size +3d +Printer Price, If needed, welcome to help make speak to with us by our web page or cellular phone consultation, we are going to be delighted to serve you.

Good quality Leica Rtc 360 3d Laser Scanner Price - Print material-exquisite white-8006 – Digital Manufacturing Detail:

3D Printing Materials

Exquisite white-8006

Introduction of 3D Printing Materials

Characteristics

SZUV-W8006

PRODUCT DESCRIPTION

SZUV-W8006 is an ABS like SL resin which has accurate and durable features. It is designed for solid state SLA platforms. SZUV-W8006 can be applied in master patterns, concept models, general parts and functional prototypes in the field of automotive, medical and consumer electronics industries.The parts duability building with SZUV-W8006 is over 6.5months.SZUV-W8006

TYPICAL FEATURES

-Liquid resin`s medium viscosity, so easy recoating, easy clean parts and machines

-Improved strength retained, improved dimensions retention of parts in humid condition

-need minimal part finishing

-Long shelf life in machine

TYPICAL BENEFITS

-Need less part finishing time,easier post-curing

-Buliding accurate and high tough parts with an improved dimensional stability

-High quality controls for vacuum casting parts

-Low shrink and good resistance to yellowing

-Magnificent white color

-Outstanding machinable SLA material

Physical Properties – Liquid Material

Appearance	White
Density	1.13g/cm³ @ 25 ℃
Viscosity	376 cps @ 27 ℃
Dp	0.148 mm
Ec	7.8 mJ/cm²
Building layer thickness	0.1mm

Mechanical Properties of Post-Cured Material

MEASUREMENT	TEST METHOD	VALUE
		90-minute UV post-cure
Hardness, Shore D	ASTM D 2240	87
Flexural modulus, Mpa	ASTM D 790	2,592-2,675
Flexural strength, Mpa	ASTM D 790	70- 75
Tensile modulus, MPa	ASTM D 638	2,599-2,735
Tensile strength, MPa	ASTM D 638	39-56
Elongation at break	ASTM D 638	13 -20%
Poisson`s Ratio	ASTM D 638	0.4-0.43
Impact strength notched Izod, J/m	ASTM D 256	35 - 45
Heat deflection temperature, ℃	ASTM D 648 @66PSI	62
Glass transition,Tg，℃	DMA，E”peak	73
Coefficient of thermal expension, /℃	TMA(T<Tg)	95*E-6
Density, g/cm³		1.16
Dielectric Constant 60 Hz	ASTM D 150-98	4.6
Dielectric Constant 1 kHz	ASTM D 150-98	3.9
Dielectric Constant 1 MHz	ASTM D 150-98	3.6
Dielectric StrengthkV/mm	ASTM D 1549-97a	14.9

Note: the temperature of szuv-w8006 should not be too high. Please use it below 25c.Recommended temperature for use and preservation is 18-25 ℃

Fire Fighting Measures

（1） extinguishant

Dry powder fire extinguishing agent, alcohol resistant foam extinguishing agent, carbon dioxide, dry sand, spray water.

（2） Special risk

Fires may produce irritation and harmful gas

（3） The firemen of protective measures

Fireman should wear protective appliances (eye protection, protective clothing, mailing gas with gas mask, etc.), put out the fire in the windward.

6. Accidental Release Measures

（1） Homework personnel protective equipment

Ensure adequate ventilation, wear suitable protective clothing, make a good job in hand and eye/face protection.

（2） Environmental protection measures

Prevent products from entering the drain or open water

（3） Cleaning method

For a small amount of leakage, use dry sand, soil and towels absorb the residual liquid, recycling and airtight container.

For a large number of leakage, leakage of liquid can be in front of the embankment, the introduction of recycle to safe place.

（4） Secondary hazard prevention measures

Quickly remove all fire spark (ban on smoking in nearby, and the ignition).

7. Handling And Storage

（1） Operation treatment technical measures

Avoid contact with eyes, skin and clothing. Don’t inhaling mist or steam, don’t accidentally swallow, keep container tightly closed after the thorough cleaning.

（2） Partial or full ventilation Maintain adequate ventilation

（3） Safe handling matters needing attention No smoke, no fire

（4） Safe storage conditions

Stored in a cool, well ventilated place, away from heat, sparks and flames. Keep container tightly closed until it is put into use.

（5） packaging container and material

In the process of custody, please do not transfer to other containers. Don’t fall back to the original containers of products that will be used.

Cases

SOME OF MY PROJECTS

btn12
btn7
汽车配件
包装设计
艺术设计
医疗领域

Education

Rapid prototype

Auto Parts

Constructional design

Art Design

Medical

Product detail pictures:

Related Product Guide:
Market Overview: Automotive 3D Printing Market Research Report by Top Players, Gross Margin, Profit Margin, Revenue, Forecast 2023 | Handheld 3d Scanner Review
His Bosses Rejected His Idea. Then Hans Langer Became A Billionaire From His Plan For Giant 3-D Printers. | Handheld 3d Scanner Review

Our target is to consolidate and improve the quality and service of existing products, meanwhile constantly develop new products to meet different customers' demands for Good quality Leica Rtc 360 3d Laser Scanner Price - Print material-exquisite white-8006 – Digital Manufacturing , The product will supply to all over the world, such as: Houston, Salt Lake City, Azerbaijan, because of our company has been persisting in the management idea of "Survival by Quality, Development by Service, Benefit by Reputation" . We fully realize the good credit standing, the high quality products, the reasonable price and the professional services are the reason that the customers choose us to be their long-term business partner.

3d Laser Scanning Companies Manitoba