I-Resin SZUV-T1150-ukumelana nobushushu obuphezulu
Intshayelelo ngokubanzi
Iimpawu:
I-SZUV -T1150 yintlaka ye-SL emthubi eye yasebenza ngokungafaniyo ne-thermal. Iyakwazi ukumelana namaqondo obushushu angaphaya kwe 200℃ ngexesha elifutshane kunye ne 120℃ ngexesha elide. Yenzelwe ukuphatha iindidi ezininzi zobushushu obuphezulu kunye nezicelo zovavanyo olubi.
Iimpawu eziqhelekileyo
Amandla aphezulu kunye nokuchasana okuhle
I-SZUV-T1150 inokumelana nokufuma, amanzi kunye nezinyibilikisi, ezifana nepetroli, ulwelo lokuhambisa, i-oyile kunye nesipholisi. Ngokumelana nokushisa okungenakulinganiswa, ifanelekile ukuhamba, i-HVAC, ukukhanya, izixhobo, ukubumba kunye nezicelo zokuvavanya itonela yomoya.
Yakha ngokukhawuleza kwaye uphuhlise ngokukhawuleza
Ngokubonelela ngemveliso ekhawulezayo kunye neengxenye ezinomgangatho ogudileyo, ekulula ukuwuphatha, i-SZUV-T1150 inokugqiba iprojekthi yakho ukusuka kumzobo ukuya kwiindawo zokuvavanya ngexesha elifutshane.
Usetyenziso oluqhelekileyo
-Uvavanyo lwecandelo elingaphantsi kwe-hood
-Ubushushu obuphezulu bokubumba i-RTV
-Uvavanyo lwetonela yomoya
-Uvavanyo lwezixhobo zokukhanyisa
-Izixhobo ezidibeneyo ze-autoclave
-Uvavanyo lwecandelo le-HVAC
-Uvavanyo oluninzi
-Amathambo
Iimeko zesicelo
Imfundo
Izandla zokubumba
Amacandelo Auto
Uyilo lokuPakisha
Uyilo lobuGcisa
Ezonyango
| Imbonakalo | mhlophe |
| Ukuxinana | 1.13g/cm3@ 25 ℃ |
| Viscosity | 430~510 cps @ 27 ℃ |
| Dp | 0.155 mm |
| Ec | 7.3 mJ/cm2 |
| Ubungqingqwa bomaleko wokwakha | 0.05 ~ 0.12mm |
| Umlinganiselo | Indlela yoVavanyo | Ixabiso | |
| Imizuzu engama-90 ye-UV emva kokunyanga | Imizuzu engama-90 UV +2 iiyure@160℃ thermal post-cure | ||
| Ubunzima, Unxweme D | I-ASTM D 2240 | 88 | 92 |
| Flexural modulus, Mpa | I-ASTM D 790 | 2776-3284 | 3601-3728 |
| Amandla e-Flexural, uMpa | I-ASTM D 790 | 63-84 | 92-105 |
| Imodyuli yokuqina, iMPa | I-ASTM D 638 | 2942-3233 | 3581-3878 |
| Amandla okuqina, MPa | I-ASTM D 638 | 60-71 | 55-65 |
| Ukwandisa ngexesha lekhefu | I-ASTM D 638 | 4-7% | 4-6% |
| Amandla empembelelo, inotched lzod, J/m | I-ASTM D 256 | 12-23 | 11-19 |
| Ubushushu bokutshintsha ubushushu, ℃ | I-ASTM D 648 @66PSI | 91 | 108 |
| Utshintsho lweglasi, Tg, ℃ | DMA, E'peak | 120 | 132 |
| I-Coefficient yokwandiswa kwe-thermal, E6/℃ | TMA (T | 78 | 85 |
| I-Thermal conductivity, W/m.℃ | 0.179 | ||
| Ukuxinana | 1.26 | ||
| Ukufunxwa kwamanzi | I-ASTM D 570-98 | 0.48% | 0.45% |
