SL 3D printer-3DSL-600
Bophahamo bo phahameng ka ho fetesisa: 600 * 600 * 400mm (100 - 400mm e ka etsoa ka mokhoa o ikhethileng)
Boholo ba mochine: 1675 * 1210 * 2000mm
Ka potlako resin vat.
Moralo o ikhethileng oa vat.
Ka theknoloji e feto-fetohang ea ho lekola.
Mamello e kholo ea resin.
Lisebelisoa
Thuto
Li-prototype tse potlakileng
Koloi
Ho lahla
Moqapi oa Litšoantšo
Bongaka
| Mohlala | 3DSL-600 |
| X/Y axis form size size | 600mmx600mm |
| Boholo ba sebopeho sa axis ea Z | 100-400 limilimithara |
| Boholo ba mochini | 1675mm×1210mm×2000mm |
| Boima ba mochini | 1050kg |
| Qala sephutheloana | 240kg(230kg+10kg) |
| Bokhoni ba ho hatisa | boholo ba 400g/h |
| Boima ba khatiso bo phahameng | 80kg |
| Resin mamello | 13kg |
| Mokhoa oa ho hlahloba | ho sekoa ha seketsoana se feto-fetohang |
| Ho etsa bonnete | ±0.1mm(L≤100mm), ±0.1%×L (L>100mm) |
| Mokhoa oa ho futhumatsa resin | ho futhumatsa moea o chesang (ho ikhethela) |
| Lebelo le phahameng la ho skena | 10m/s |
| Resin vat | e ka nkeloang sebaka |
| Vat e thusang | boikhethelo |
| Mofuta oa resin | SZUV-W8001(white), SZUV-S9006(high toughness), SZUV-S9008(flexible), SZUV-C6006(clear), SZUV-T100(high temperature resistance), SZUV-P01(mongora-bopaki), ba bang |
| Mofuta oa laser | Laser ea boemo bo tiileng ba 355nm |
| Matla a laser | 3w@50KHz |
| Sistimi ea ho skena | mochine oa galvanometric |
| Mokhoa oa ho roala hape | boemo bo bohlale ba vacuum recoating |
| Botenya ba lera | 0.03- 0.25mm (e tloaelehileng: 0.1mm; ho nepahala: 0.03- 0.1mm; katleho: 0.1- 0.25mm) |
| Enjene ea ho phahamisa | enjene ea servo e nepahetseng haholo |
| Qeto | 0.001mm |
| Ho nepahala ha maemo | ± 0.01 limilimithara |
| Sethala sa Datum | 'mabole |
| Sistimi ea ts'ebetso | Windows 7/10 |
| Laola software | SHDM SL 3D Printer Control Software V2.0 |
| Sebopeho sa faele | STL / SLC faele |
| Marang-rang | Ethernet / Wi-fi |
| Ho kenya matla | 220VAC,50HZ,16A |
| Mocheso/ mongobo | 24-28℃/35-45% |
Ngola molaetsa wa hao mona mme o re romele wona
