SL 3D printer 3DSL-360
Molemo oa SL 3D Printers tsa SHDM
High e sebetsang hantle, mme lebelo le phahameng le ka fihla400g/h'me tlhahiso ea lihora tse 24 e ka fihla ho 10kg.
Large build volumes, boholo bo fumanehang li360*360*300(mm),600*600*400(mm),800*800*550(mm),1600*800*550(mm), le mefuta e meng e hlophisitsoeng ea ho haha.
Mts'ebetso ea leholimo e theko e tlase ebile e ntlafalitsoe haholo maemong a matla, ho tiea le ho hanyetsa mocheso o phahameng, o loketseng lits'ebetso tsa boenjiniere.
Oka ho hlaka e ntlafalitsoe ka boholo bo nepahetseng le botsitso.
Mlikarolo tsa ultiple li ka phekoloa ka nako e le 'ngoe ho software ea taolo mme ho na le likarolo tse phethahetseng tsa ho iketsetsa mosebetsi.
Se sebetsang bakeng sa tlhahiso e nyane ea batch.
UTheknoloji e ntle ea sehlaha ea litanka tsa resin tse nang le molumo o fapaneng, resin ea 1 kg e ka hatisoa, e loketseng haholo bakeng sa lipatlisiso le nts'etsopele.
Rtanka ea resin e ka khonehang, resin e fapaneng e ka fetoloa habonolo.
Hobaneng 3DSL-360
Bophahamo bo phahameng ba ho aha: 360 * 360 * 300 limilimithara (e tloaelehileng 300mm, botebo ba tanka ea resin bo ka khoneha)
Resin vat e ka nkeloang sebaka ka potlako, e ts'ehetsa tanka e nyane ea resin ea 1kg.
Ka theknoloji e feto-fetohang ea ho lekola.
Moralo o ikhethileng oa vat.
Mamello e kholo ea resin le ts'ebetso ea ho tlatsa ka boits'oaro.
Tlhahiso e phahameng: 260g/h
Boima ba resin: 6kg
Libaka tsa kopo
Thuto
Li-prototype tse potlakileng
Koloi
Ho lahla
Moqapi oa Litšoantšo
Bongaka
| Mohlala | 3DSL-360 |
| Boholo ba sebopeho sa axis ea XY | 360mmx360mm |
| Boholo ba sebopeho sa axis ea Z | 50-300 limilimithara |
| Boholo ba mochini | 1210mm×920mm×1780mm |
| Boima ba mochini | 850kg |
| Qala sephutheloana | 70kg(65kg+5kg) |
| Bokhoni ba ho hatisa | boholo ba 260g/h |
| Boima ba khatiso bo phahameng | 40kg |
| Resin mamello | 6kg |
| Mokhoa oa ho hlahloba | Mokhoa oa ho skena o feto-fetoha oa sekena |
| Ho etsa bonnete | ±0.1mm(L≤100mm) ±0.1%×L(L>100mm) |
| Mokhoa oa ho futhumatsa resin | ho futhumatsa moea o chesang (Ho ka khoneha ha ho hlokahala) |
| Lebelo le phahameng la ho skena | 10m/s |
| Resin vat | e ka nkeloang sebaka |
| Vat e thusang | boikhethelo |
| Mofuta oa resin | SZUV-W8001(white), SZUV-S9006(high toughness)， SZUV-S9008(flexible)， SZUV-C6006(clear),SZUV-T100(high temperature)， SZUV-P01(mongobo-bopaki)， |
| Mofuta oa laser | Laser ea boemo bo tiileng ba 355nm |
| Matla a laser | 3w@50KHz |
| Sistimi ea ho skena | mochine oa galvanometric |
| Mokhoa oa ho roala hape | boemo bo bohlale ba vacuum recoating |
| Botenya ba lera | 0.03- 0.25mm（tloaelo: 0.1mm; ho nepahala: 0.03- 0.1mm; bokhoni: 0.1-0.25mm |
| Enjene ea ho phahamisa | enjene ea servo e nepahetseng haholo |
| Qeto | 0.001mm |
| Ho Feta Ho Nepaha | ± 0.01 limilimithara |
| Sethala sa Datum | 'mabole |
| Sistimi ea ts'ebetso | Windows 7/10 |
| Laola software | SHDM SL 3D Printer Control Software V2.0 |
| Sebopeho sa faele | STL / SLC faele |
| Marang-rang | Ethernet / Wi-fi |
| Ho kenya matla | 220VAC,50HZ,16A |
| Mocheso / mongobo | 24-28℃/35-45% |
Ngola molaetsa wa hao mona mme o re romele wona
