Resin SZUV-T1150-elu okpomọkụ na-eguzogide
Okwu mmalite
Njirimara:
SZUV -T1150 bụ resin SL edo edo nke nwere arụmọrụ ọkụ na-enweghị atụ. Ọ nwere ike idi okpomọkụ karịa 200 ℃ na obere oge na 120 ℃ na ogologo oge. Emebere ya maka ijikwa ụdị okpomọkụ dị iche iche na ngwa nnwale ọjọọ.
Atụmatụ ahụkarị
Ike dị elu na ezigbo nguzogide
SZUV-T1150 nwere ike iguzo iru mmiri, mmiri na ihe mgbaze, dị ka mmanụ ụgbọala, nnyefe mmiri mmiri, mmanụ na coolant. Site na nguzogide okpomọkụ ya na-enweghị atụ, ọ dabara adaba maka ịgbasa, HVAC, ọkụ, ngwá ọrụ, ịkpụzi na ngwa nyocha ọwara ikuku.
Mee ngwa ngwa ma wulite ngwa ngwa
Site n'inye ngwa ngwa ngwa ngwa na akụkụ na elu dị larịị, dị mfe ijikwa, SZUV-T1150 nwere ike imecha ọrụ gị site na ịbịaru na akụkụ ule na obere oge.
Ngwa a na-ahụkarị
-Nnwale akụrụngwa n'okpuru mkpuchi
-Elu okpomọkụ RTV ịkpụzi
-Nnwale ọwara ikuku
-Nnwale ọkụ ọkụ
- Ngwa ọrụ autoclave mejupụtara
-Nnwale akụrụngwa HVAC
-Nnyocha nke ukwuu
- Orthodontics
Ngwa ngwa
Agụmakwụkwọ
Akpụkpọ aka
Akụkụ akpaaka
Nkwakọ ngwaahịa
Nhazi nka
Ọgwụ
| Ọdịdị | ọcha |
| Njupụta | 1.13g / cm3@ 25 ℃ |
| Viscosity | 430~510 cps @ 27 ℃ |
| Dp | 0.155 mm |
| Ec | 7.3mJ/cm2 |
| Ụlọ oyi akwa ọkpụrụkpụ | 0.05 ~ 0.12mm |
| Ntụ | Usoro ule | Uru | |
| Ngwọta UV nke nkeji 90 | 90-nkeji UV +2 awa @ 160 ℃ ọgwụgwọ ọkụ gachara | ||
| Hardness, Shore D | ASTM D2240 | 88 | 92 |
| Mgbanwe mgbanwe, Mpa | ASTM D790 | 2776-3284 | 3601-3728 |
| Ike mgbanwe, Mpa | ASTM D790 | 63-84 | 92-105 |
| modul tensile, MPa | ASTM D638 | 2942-3233 | 3581-3878 |
| Ike tensile, MPa | ASTM D638 | 60-71 | 55-65 |
| Elongation na ezumike | ASTM D638 | 4-7% | 4-6% |
| Ike mmetụta, ọpụrụiche lzod, J/m | ASTM D256 | 12-23 | 11-19 |
| Okpomọkụ ngbanwe, ℃ | ASTM D 648 @66PSI | 91 | 108 |
| Ntugharị iko, Tg, ℃ | DMA, elu | 120 | 132 |
| Ọnụọgụ nke mgbasawanye thermal, E6/℃ | TMA (T | 78 | 85 |
| Nrụpụta ọkụ, W/m.℃ | 0.179 | ||
| Njupụta | 1.26 | ||
| Ntinye mmiri | ASTM D 570-98 | 0.48% | 0.45% |
