Ihe nbipute FDM 3D 3DDP-500S
Teknụzụ isi:
- Short-n'ókè nri Ọdịdị nwere ike n'ụzọ dị irè dozie filament ịbịaru nsogbu na Ya mere hụ na ihe magburu onwe obibi ọrụ.
- A na-anakwere skru-rods na axis Z nke nwere ike hụ na mmegharị ahụ.
- Ụlọ ọrụ sekit ụlọ ọrụ, na-arụ ọrụ maka awa 200 na-enweghị nrụgide
- Ebubata mbubata, ntuziaka ahịrị kwụ ọtọ dị elu, mkpọtụ ngagharị dị ala, iji hụ na nbipụta dị elu
- Gaa n'ihu na-ebipụta n'okpuru ụkọ ihe na nkwụsị.
- 57 usoro nnukwu moto nzọ ụkwụ na-eme ka ọsọ obibi akwụkwọ dịkwuo mma.
- Igbe ngwá ọrụ arụnyere, nwere ọgụgụ isi na enyi na enyi
Ngwa:
Prototype, agụmakwụkwọ na nyocha sayensị, okike okike, imepụta oriọna na imepụta ihe, okike okike na ihe nkiri, imepụta nka
Ngosipụta ụdị mbipụta
| Nlereanya | 3DDP-500S | Okpomọkụ akwa akwa | Nọmalị≦100℃ |
| Nkà na ụzụ ịkpụzi | FDM | ọkpụrụkpụ oyi akwa | 0.1 ~ 0.4 mm mgbanwe |
| Nọmba nozzle | 1 | Okpomọkụ nozzle | Ruo 250 degrees |
| Mee nha | 500×500×800mm | Dayameta nozzle | 0.4mm / 0.8mm |
| Nha akụrụngwa | 720×745×1255mm | Ngwa eji ebi akwụkwọ | Cura, mee ka 3D dị mfe |
| Nha ngwugwu | 820×820×1460mm | Asụsụ dị nro | Chinese ma ọ bụ Bekee |
| Ọsọ mbipụta | ≦200mm/s | Frame | 2.0mm ígwè mpempe akwụkwọ metal akụkụ na enweghị nkebi ịgbado ọkụ |
| Dayameta ihe oriri | 1.75mm | Kaadị nchekwa ebipụta n'ịntanetị | Kaadị SD n'ịntanetị ma ọ bụ n'ịntanetị |
| VAC | 110-240v | Ụdị faịlụ | STL, OBJ, G-koodu |
| VDC | 24v | Ibu akụrụngwa | 100kg |
| Ihe eji eme ihe | PLA, soft gluu, osisi, carbon fiber, metal consumables 1.75mm, otutu agba nhọrọ | Ibu ngwugwu |
150kg |
