Resin-SZUV-W8006-fararen kyan gani
Gabatarwar Kayan Buga na 3D
Halaye
Saukewa: SZUV-W8006
BAYANIN KYAUTATA
SZUV-W8006 shine ABS kamar resin SL wanda ke da ingantattun siffofi masu ɗorewa. An tsara shi don ƙaƙƙarfan dandamali na SLA na jihar. SZUV-W8006 za a iya amfani da a master alamu, ra'ayi model, general sassa da kuma aikin prototypes a fagen mota, likita da kuma mabukaci Electronics masana'antu. Ginin dorewar sassan da SZUV-W8006 ya wuce watanni 6.5.
MALALASIFFOFI
-Liquid resin ne matsakaici danko, don haka sauki ga recoating, sauki tsaftace sassa da inji
-Ingantacciyar ƙarfin riƙewa, ingantaccen girman riƙe sassa a cikin yanayin ɗanɗano
- Bukatar ƙarancin ƙarewar sashi
- Tsawon rayuwa a cikin injin
MALALAAMFANIN
- Bukatar ƙarancin lokacin ƙarewa, sauƙin warkewa
-Gina ingantattun sassa masu tauri tare da ingantacciyar kwanciyar hankali
-Maɗaukaki masu inganci don ɓangarori na simintin ƙarfe
-Ƙananan raguwa da kyakkyawan juriya ga rawaya
-Mai girma farin launi
-Fitaccen machinable kayan SLA
Abubuwan Jiki - Kayan Ruwa
| Bayyanar | Fari |
| Yawan yawa | 1.13g/cm3@ 25 ℃ |
| Dankowar jiki | 376 cps @ 27 ℃ |
| Dp | 0.148 mm |
| Ec | 7.8mJ/cm2 |
| Gine-gine kauri | 0.1mm |
Lura: zafin jiki na szuv-w8006 bai kamata ya yi girma ba. Da fatan za a yi amfani da shi ƙasa da 25 ℃. Yawan zafin jiki da aka ba da shawarar don amfani da kiyayewa shine 18-25 ℃.
Gudanarwa Da Adana
(1) Ayyukan fasaha na jiyya
Ka guji haɗuwa da idanu, fata da tufafi. Kada a shaka hazo ko tururi, kar a hadiye da gangan, kiyaye akwati sosai bayan tsaftacewa sosai.
(2) Bangare ko cikakken iskar shaka, kula da isasshiyar iskar
(3) Amintattun abubuwan kulawa da ke buƙatar kulawa Babu hayaki, babu wuta
(4) Yanayin ajiya mai aminci
Ajiye shi a wuri mai sanyi, samun iska mai kyau, nesa da zafi, tartsatsin wuta da harshen wuta. Rike akwati sosai a rufe har sai an yi amfani da shi.
(5) kwandon marufi da kayan
Yayin aiwatar da tsarewa, da fatan a kar a canja wurin zuwa wasu kwantena. Kar a koma ga ainihin kwantena na samfuran da za a yi amfani da su.
Misali
Abubuwan Aikace-aikace
Ilimi
Samfurin sauri
Sassan Motoci
Tsarin gine-gine
Zane-zane
Likita
Abubuwan Jiki (Liquid)
| Bayyanar | Fari |
| Yawan yawa | 1.13g/cm3@ 25 ℃ |
| Dankowar jiki | 376 cps @ 27 ℃ |
| Dp | 0.148 mm |
| Ec | 7.8mJ/cm2 |
| Gine-gine kauri | 0.1mm |
Kayayyakin Injini (Bayan-Cured)
| AUNA | HANYAR GWADA | DARAJA |
| 90-minti UV bayan magani | ||
| Hardness, Shore D | Saukewa: ASTM D2240 | 87 |
| Modules mai sassauci, Mpa | Saukewa: ASTM D790 | 2,592-2,675 |
| Ƙarfin sassauƙa, Mpa | Saukewa: ASTM D790 | 70-75 |
| Modules tensile, MPa | Saukewa: ASTM D638 | 2,599-2,735 |
| Ƙarfin ɗaure, MPa | Saukewa: ASTM D638 | 39-56 |
| Tsawaitawa a lokacin hutu | Saukewa: ASTM D638 | 13-20% |
| Rabon Poisson | Saukewa: ASTM D638 | 0.4-0.43 |
| Ƙarfin tasirin Izod, J/m | Bayani na ASTM D256 | 35-45 |
| Zafin karkatar da zafi, ℃ | ASTM D 648 @ 66PSI | 62 |
| Canjin gilashi, Tg, ℃ | DMA, E” kololuwa | 73 |
| Coefficient na thermal faɗaɗa, / ℃ | TMA (T | 95*E-6 |
| Yawan yawa, g/cm3 | 1.16 | |
| Dielectric Constant 60 Hz | Saukewa: ASTM D150-98 | 4.6 |
| Dielectric Constant 1 kHz | Saukewa: ASTM D150-98 | 3.9 |
| Dielectric Constant 1 MHz | Saukewa: ASTM D150-98 | 3.6 |
| Ƙarfin Dielectric kV/mm | Saukewa: ASTM D1549-97A | 14.9 |
Lura: zafin jiki na szuv-w8006 bai kamata ya yi girma ba. Da fatan za a yi amfani da shi ƙasa da 25 ℃. Yawan zafin jiki da aka ba da shawarar don amfani da kiyayewa shine 18-25 ℃.
